Portfolio Selection and Risk Control for an Insurer With Uncertain Time Horizon and Partial Information in an Anticipating Environment

Methodology and Computing in Applied Probability - This paper is devoted to the study of an optimal investment and risk control problem for an insurer. The risky asset process and the insurance...     

3.0T MRI检查结合X线钼靶诊断乳腺恶性肿瘤的研究

本研究探讨3.0T磁共振成像(MRI)结合X线钼靶诊断乳腺恶性肿瘤的价值。采用回顾性研究方法,选取乳腺肿块患者110例162个病灶,给予3.0T MRI及X线钼靶检查。经病理确诊为恶性病变101个;恶性病灶形态不规则、边缘毛刺、时间-信号强度曲线(TIC)类型Ⅲ型和早期增强率≥60%比例明显高于良性病灶(P<0.05),而分叶状比例和表观扩散系数(ADC)值明显低于良性病变(P<0.05);恶性病变X线钼靶表现:形态不规则、钙化、结构不对称和大导管征比例明显高于良性病变(P<0.05);MRI联合X线钼靶诊断乳腺恶性病变的灵敏性、准确性和阴性预测值明显高于MRI诊断(P<0.05)。3.0T MRI检查结合X线钼靶诊断乳腺恶性肿瘤有较好的价值。     

Semiconducting Polymer Dots with Dual-Enhanced NIR-IIa Fluorescence for Through-Skull Mouse-Brain Imaging

Fluorescence probes in the NIR-IIa region show drastically improved imaging owing to the reduced photon scattering and autofluorescence in biological tissues. Now, NIR-IIa polymer dots (Pdots) are developed with a dual fluorescence enhancement mechanism. First, the aggregation induced emission of phenothiazine was used to reduce the nonradiative decay pathways of the polymers in condensed states. Second, fluorescence quenching was minimized by different levels of steric hindrance to further boost the fluorescence. The resulting Pdots displayed a fluorescence QY of ca. 1.7 % in aqueous solution, suggesting an enhancement of ca. 21 times in comparison with the original polymer in tetrahydrofuran (THF) solution. Small-animal imaging by using the NIR-IIa Pdots exhibited a remarkable improvement in penetration depth and signal to background ratio, as confirmed by through-skull and through-scalp fluorescent imaging of the cerebral vasculature of live mice.     

ZnO-PSAⅡ型异质结界面电荷转移过程研究

采用稳态光致发光光谱和纳秒时间分辨瞬态光谱(NTRT-PL)表征,揭示ZnO-PSA II型纳米异质结光生载流子电荷转移过程,通过甲基橙光降解实验,测得ZnO-NRs和ZnO-PSA紫外光降解率分别为25.5;和60.1;,光降解率提高到2.4倍,表明II型异质结相对于单一半导体而言,能促进光生载流子在界面间电荷转移,有利于载流子的分离.     

Precise Synthesis of Poly(thioester)s with Diverse Structures by Copolymerization of Cyclic Thioanhydrides and Episulfides Mediated by Organic Ammonium Salts

The precise synthesis of poly(thioester)s with diverse structures is still a significant challenge in the polymeric materials field. Herein, we report a novel approach to the synthesis of well‐defined poly(thioester)s by the controlled alternating copolymerization of cyclic thioanhydrides and episulfides induced by simple organic ammonium salts. Both the cation and anion have strong effects on the copolymerization. [PPN]OAc ([PPN]=bis(triphenylphosphine)iminium) with a bulky cation was proven to be efficient in initiating this polymerization, yielding poly(thioester)s with a completely alternating structure, controlled molecular weight, and narrow polydispersity. The poly(thioester) obtained from succinic thioanhydride and propylene sulfide is a typical semicrystalline material, possessing a high refractive index of up to 1.78. Because it uses readily available monomers, this method is expected to open up a new route to poly(thioester)s with diverse structures and properties.     

Study of nano‐Cu/SiO2 catalysts for highly selective hydrogenation of acetophenone

Hydrogenation of acetophenone over nano‐Cu/SiO₂ catalysts was investigated. The catalysts, prepared by a liquid precipitation method using various precipitating agents, were characterized using low‐temperature nitrogen adsorption, X‐ray diffraction, temperature‐programmed desorption of ammonia, hydrogen temperature‐programmed reduction, transmission electron microscopy and X‐ray photoelectron spectroscopy. It was found that the catalysts prepared by a homogeneous precipitation method had better activity and stability than those prepared by a co‐precipitation method. The catalyst prepared using urea as precipitating agent had well‐dispersed copper species, high surface area and abundant pore structure. The catalytic performance and mechanism of the Cu/SiO₂ catalysts were further studied. It was found that the activity and stability of the catalysts could be improved by adjusting the proportion of Cu⁺/(Cu⁺ + Cu⁰). The sample prepared using urea as precipitating agent presented higher activity and selectivity. Also, the catalyst prepared using urea maintained a high catalytic performance while being continuously used for 150 h under the optimal reaction conditions.     

Spatially modulated polarimetry based on a vortex retarder and Fourier analysis

We report a spatially modulated polarimetry scheme by using a zero-order vortex half-wave retarder(ZVHR)and a spatial Fourier analysis method.A ZVHR is employed to analyze the input polarized light and convert it into a vectorial optical field,and an analyzer is set after the ZVHR to form an hourglass intensity pattern due to the spatial polarization modulation.Then,the input light’s Stokes parameters can be calculated by spatial Fourier analysis of the hourglass pattern with a single shot.The working principle of the polarimeter has been analyzed by the Stokes-Mueller formalism,and some quantitative measuring experiments of different polarization states have been demonstrated.The experimental results indicate that the proposed polarimeter is accurate,robust,and simple to use.     

水化硅酸钙纳米压痕分子动力学模拟方法优化

针对水化硅酸钙纳米压痕模型忽视了压头与基底之间相互作用的问题，由尺寸差异引起的金刚石压头难以计算的问题，以及Wittmann模型无法得到实际接触面积的问题，提出了新的模型与计算方法．结合分子动力学方法，采用金刚石压头-Wittmann模型基底的组合方式构建无定形态水化硅酸钙纳米压痕试验模型．在建模阶段，考虑到压头模型与基底模型粒子间尺寸差异，提出了等比例替换模型，通过公式推导并就不同尺寸模拟结果验证了等比例替换模型的可行性．在计算阶段，提出了局部前处理的弛豫方法进行模拟．确定最大荷载位置处的接触面积为546 nm2，进而求出水化硅酸钙模型硬度H为0.84 GPa、折合模量Er为30.52 GPa．并通过纳米压痕试验，验证了模拟结果的准确性，证明了模型的科学性，对今后水化硅酸钙(C-S-H)纳米层面的模拟具有重要借鉴意义．     

Construction of Cyclobutanes by Multicomponent Cascade Reactions in Homogeneous Solution through Visible-Light Catalysis

[2+2] Photocycloaddition of two olefins is a general method to assemble the core scaffold, cyclobutane, found in numerous bioactive molecules. A new approach to synthesize cyclobutanes through multicomponent cascade reactions by merging aldol reaction and Witting reaction with visible-light-induced [2+2] cycloaddition is reported. An array of cyclobutanes with high selectivity has been achieved from commercially available aldehydes, ketones (or phosphorus ylide), and olefins with visible-light irradiation of a catalytic amount of (fac-tris(2-phenylpyridinato-C₂,N)iridium) ([Ir(ppy)₃]) at room temperature. Control experiments and spectroscopic studies revealed that the triplet–triplet energy transfer from the excited [Ir(ppy)₃]* to enones, generated in situ from aldehyde and ketone or aldehyde and phosphorus ylide, is responsible for these simple and efficient muticomponent transformations.     

热熔还原法制备超硬复合相氮化碳及其工艺探索

本文采用热熔还原法,以聚氯乙烯、氯化铵、氧化铁为原料制备复合超硬相氮化碳(α/β-C3 N4).采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)以及透射电子显微镜(TEM)对样品进行表征.在此基础上分析了不同温度和原料配比下合成复合相C3 N4的物相组成及形貌变化.结果表明样品形貌随着原料配比的不同在颗粒、棒状、纳米线之间转变.当C、N和Fe之间摩尔比为3:4:0.4时,所制备出的样品呈纳米线状,纳米线的直径约为15 nm,结晶性良好.而在其它配比下,只能获得棒状或颗粒状α/β复合相C3 N4.